MT3608 Boost Converter Module: Best Guide

The MT3608 Boost Converter Module is a compact, high-efficiency voltage booster designed to elevate voltages from as low as 2V up to a maximum of 28V DC. This device plays a vital role in applications where precise voltage amplification is essential. Its compact size and versatile design make it a preferred choice for a wide range of voltage-boosting requirements.

Features of MT3608 Boost Converter

The MT3608 Boost Converter module boasts an array of features that contribute to its efficiency and versatility:

Overheat Protection: This feature ensures safety by preventing the module from overheating, thus enhancing its durability.

Compact Size: The module’s small form factor allows for ease of integration into various circuit designs, making it suitable for projects with space constraints.

Output Current Capability: With the ability to deliver up to 2 amperes of output current, it provides robust power output.

MT3608 Pinout

The MT3608 is a commonly used boost converter module. It typically comes in a small module with pins for easy integration:

• VIN: This pin is where you input your voltage source. Connect your higher voltage source (such as a battery) here.
• GND: Ground pin, serving as the reference point for the module and the connected circuitry. Connect this to the ground of your system.
• VOUT: This is the regulated output pin where you get your boosted voltage.
• EN/SHDN: The enable (EN) or shutdown (SHDN) pin. It controls the operation of the module. High or logic voltage on this pin enables the module, while low or logic zero voltage shuts it down to save power.
• FB: Feedback pin used to set the output voltage. Connecting resistors here helps determine the desired output voltage.

Technical Specifications of MT3608 Boost Converter

Input Voltage Range: Accepts a wide range of input voltages, from as low as 2V DC to 24V DC, allowing for flexibility in power sources.

Output Accuracy: The module delivers an impressive 93% output accuracy, ensuring reliability in voltage regulation.

Adjustable Output Voltage: Users can fine-tune the output voltage, ranging from 5V DC to 28V DC, to suit specific application requirements.

Soft Start Function: Initiates a gradual power-up sequence, preventing sudden power surges and ensuring smooth operation.

Low Quiescent Current: Requires minimal standby current, with a maximum of only 200uA, which helps in reducing power consumption.

Cost-Effectiveness: Provides cost-efficient voltage boosting without compromising on performance.

MT3608 High-Efficiency Chip: Utilizes an efficient boosting integrated circuit (IC) that enhances overall performance.

Understanding the MT3608 Boost Converter

The MT3608 Boost Converter Module operates as a compact, highly efficient, and cost-effective solution for converting or amplifying voltages within a range of 2V to 28V DC.

With a maximum output current of 2 amperes, this module caters to various voltage-boosting needs. Notably, its adjustable output voltage, facilitated by a variable resistor, offers customization based on specific voltage requirements.

Components and Features

This module encompasses a minimal yet critical set of components, primarily centered around the MT3608 IC. The MT3608 Boost Converter serves as the module’s core, integrating features such as overheat protection, low quiescent current, soft start functionality, and more. Additional components include two ceramic capacitors, a variable resistor, a standard resistor, a Schottky diode, and a 22uH inductor. The inductor, in particular, is a vital component in the functionality of most voltage boosting circuits.

Applications of MT3608 Boost Converter Module

The versatility of the MT3608 module allows it to cater to a wide range of applications, including but not limited to:

Solar Applications: Apt for solar-powered circuits, effectively converting low voltage outputs into higher usable voltages.

Portable and Battery-Operated Devices: Crucial in providing stable power to portable devices such as power banks and handheld gadgets.

Power Supplies and Banks: Facilitates efficient power supply units and banks, ensuring regulated voltage output.

MPU-6050: Features, Specifications & Important Applications

Battery Chargers: Suitable for battery charging circuits, ensuring precise voltage control during charging processes.

Where to Utilize

The MT3608 module finds optimal utilization in scenarios where voltage requirements stay below 28V, and current needs are below 2 amperes. Its compact design and cost-effectiveness make it particularly suitable for portable devices like power banks and portable power supplies. Additionally, its affordability renders it an excellent choice for educational projects where students can experiment with voltage regulation.

Practical Use of MT3608 Boost Converter Module

Utilizing the MT3608 module is straightforward. Users need to connect an input voltage ranging from 2V to 24V DC to the module. This input can be sourced from batteries, solar cells, or other compatible power sources. To set the desired output voltage, users can utilize a digital multimeter to monitor the output voltage while adjusting the variable resistor until the desired voltage level is achieved.

The MT3608 Boost Converter Module serves as an invaluable tool for various projects, enabling efficient voltage amplification and precise power optimization. Its simple operation, combined with its broad range of applications, makes it a versatile and dependable solution for diverse voltage boosting requirements across different industries and settings.

Follow us on LinkedIn”Electrical Insights” to get the latest updates in Electrical Engineering. You can also Follow us on LinkedIn and Facebook to see our latest posts on Electrical Engineering Topics.